|
S514/56 56kbps DDS Card specifications
 One 56/64kbps DDS line interface, one Secondary RS232 port to 128kbps for ISDN or dial backup.
- Power: 550mA at +5v
- PCI 32 bit 5v. Optionally available in 5v/3/3v configuration.
- Temperature range: 0 - 45C
- All set-up and configuration is in software or by machine BIOS.
- DSU/CSU set up entirely in software.
- 56kbps DDS compatible with Bellcore standards
- Network or internal clocking for back to back test setups
- Software controlled DSU/CSU test modes
- Remote monitoring of card and CSU/DSU operation
- Dimensions: 170mm x 99 mm
|
|
- DMI: Receiving Data Mode Idle
- ZSC: Receiving Zero Code Suppression
- CMI: Receiving Control Mode Idle
- OOS: Receiving Out of Service
- OOF: Receiving Out of Frame
- DLP: Receiving DSU Non-Latching loopback code
- UMC: Receiving Unassigned MUX Code
- RLOS: Receive Loss of Signal
- Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.
- Windows 2000, Windows XP, Windows 9x, Windows ME, Linux (all versions, releases and distributions from 1.0 up), FreeBSD, Open BSD, NetBSD.
- IP/IPX over Frame Relay/ PPP/ HDLC/ X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (DMT and TCOP), SNA over X.25
- WANPIPEMON, SNMP, System logs.
|
